Commercial Dehumidifier for reducing humidity in warehouses

The Commercial dehumidifier VAC-TTK 165 ECO uses the condensation principle to automatically dehumidify the areas. It is a portable type and can be easily stored anywhere. It is fully designed and manufactured by Trotec, Germany. This is a flexible device with a maximum dehumidification capacity of 52 liters per day at a discharged airflow of 350 m³/h. It is a cost-effective solution for practical commercial dehumidification applications.

Another feature of VAC-TTK-165 ECO is built in steel construction carriage with a transport handle and large wheels. It can be moved easily even in the often harsh environment of the construction site. Additional transport safety is provided by convenient cable holders on the rear of the device. The maintenance of the dehumidifier does not present any major problem for the user, as the washable air filter is easily accessible and quickly cleaned.

The VAC-TTK-165 ECO is ready for immediate operation, easy to use and ideally suited for continuous dehumidification. Additionally, this dehumidifier is built with a powerful rotary piston compressor that allows for easy transport and storage in any location. It also has an external condensate drain and the condensate pump that is optionally available. This device has a tank of water, which turns off automatically when it is full. With an alarm light signaling when the tank is full. It immediately removes huge amounts of moisture from the room air and even at low temperatures in unheated rooms, thanks to the automatic defrosting of hot gas. It is ideal at temperatures of 5°C-32°C to a higher location and operating humidity range of 30%RH up to 90%RH.

Applications of Commercial Dehumidifier, model no. VAC-TTK-165 ECO:

    1. It is designed for use at building sites.
    2. It is used to remove excess moisture in the food factories to avoid wet floors, caking and clogged machinery.
    3. It is typically used to reduce the humidity of the warehouses.
    4. It is used in basement rooms for drying and dehumidifying purposes.
    5. It is used to maintain the dryness of moisture-sensitive loads etc.
    6. It is used in paper & printing industries where high humidity increases the consistency of paper and ink color.
    7. It is used to maintain the humidity level in a museum.
    8. It can be used during the manufacture and storage of drugs in the pharmaceutical industry.
    9. Dehumidification in data center rooms to protect electronic parts from corrosion.
    10. It is commonly used to reduce humidity in production areas.
    11. It is used to minimize the moisture content in gyms, spa and fitness centers.
    12. It is used in paper & printing industries where high humidity increases the consistency of paper and ink color.

Features of Commercial Dehumidifier, model no. VAC-TTK-165 ECO:

    1. It has a high dehumidification efficiency even at low temperatures.
    2. It is a  cost-effective solution for traditional commercial dehumidification applications.
    3. It is ideal for rooms up to the size of 230 m³.
    4. It is made of robust steel construction.
    5. It is extremely mobile thanks to conveying rollers and handle rod.
    6. It allows the user to move quickly and easily to another place of action.
    7. It has a washable air filter that is easily accessible and quickly cleaned.
    8. It consists of an energy-efficient rotary compressor.
    9. It has a condensate drain connection for permanent dehumidification.
    10. It has a water tank, and it switches off automatically when it’s full.
    11. It has a warning light that indicates a full water tank.
    12. It is eco-friendly of all time.

Specifications of Commercial Dehumidifier, model no. VAC-TTK-165 ECO for dehumidification in construction sites, moisture removal in food factories and regulating humidity in warehouses and production areas :

    1. The maximum dehumidification performance is up to 52 liters per day.
    2. It has a 20 l/24h dehumidification capacity at 20 °C / 60 % RH.
    3. It has a 50 l/24h dehumidification capacity at 30 °C / 80 % RH.
    4. The maximum air volume of commercial dehumidifier for dehumidification in construction sites is 350 m³/h.
    5. It has a steel coated housing design.
    6. The dehumidifier can operate both 50Hz supplies with 220-240Voltage.
    7. The nominal current consumption is 3.6A.
    8. The power supply consumes 0.9kW.
    9. The operating temperature range is 5°C to 32°C.
    10. The operating humidity range is 30%Rh to 90%Rh.
    11. The recommended room size for dry keeping is 230 m³ or 90 m².
    12. The commercial dehumidifier for moisture removal in food factories has a rotary piston compressor.
    13. The type of cooling agent is R-410a.
    14. The CO2 equivalent of the compressor is 0.84 t.
    15. It has a water tank of up to 5 liters.
    16. It has a sound level of 56 dBA for stage 1.
    17. It has an automated air circulation or electronic defrost system.
    18. It has a non-stop dehumidification function.
    19. It has a single-stage axial fan.
    20. It has a water tank, and it switches off automatically once it’s full.
    21. It has a warning light indicator when the container is full.
    22. The air filter is readily accessible and easy to clean.
    23. It’s a transport/ carrying design.
    24. It has full-rubber non-marking wheels.
    25. The commercial dehumidifier for regulating humidity in warehouses and production areas has a hose connection and allows the user for continuous drainage.
    26. The recommended dimension of the hose is 12 mm.

We supply these Commercial Dehumidifiers for dehumidification in construction sites, moisture removal in various industries like food, pharma, printing, etc and maintaining humidity in museums across all African countries covering South Africa, Kenya, Nigeria, Tanzania, Rwanda, Djibouti, Morocco, Ghana, Ethiopia, Uganda, Morocco, Tunisia, Cameroon, Mauritius, Gabon, Seychelles, etc.