This Industrial Desiccant Dehumidifier is manufactured by Trotec, Germany. It has a high dehumidification performance even with low dew points that make it suitable for the most diverse air and gas dehumidification tasks in industrial, transport or utility companies. This industrial desiccant dehumidifier helps in securing the goods and manufacturing, retaining the value of machines, inventories, and buildings by continuously protecting it against rust, condensation or mold formation.
It has a style that is extremely maintenance-friendly. It has lockable doors and filter flaps which allow quick access to all elements at any time. The device comes fitted with separate Z-line G4 air filters for both process and regeneration air. A corresponding warning-light filter control unit is also installed as default.
This industrial desiccant dehumidifier can withstand even the harshest of environmental conditions thanks to its compact stainless steel casing and an electrical control box with an IP44 safety rating. It is therefore ideally suited for all dry storage or dry air production applications at low temperatures or under especially material-straining conditions including hygiene-sensitive areas.
This industrial desiccant dehumidifier operates for the heat recycling process of the incoming regeneration air according to the TTR Trisorp Dual operating principle with separate process air flows and regeneration air implemented by one fan each, as well as a respective purging field.
Applications of Industrial Desiccant Dehumidifier, model VAC-TTR-2800
1. It is used in the steel sector for the air-drying phase and dehumidification of equipment.
2. It is used in cold stores to control dry air and dew point.
3. It is used in water processing facilities and pump stations for dry keeping of air.
4. It is used in storage, transport and dosing systems to ensure the pourability.
5. It is used in gas turbines and gas distribution stations for processing air dehumidification and regulating humidity.
6. It is used in cleanrooms and drying rooms for controlling the dehumidification and dew point.
7. It is used in freezing tunnels and cold stores for frost protection.
8. It is used in the chemical and pharmaceutical industry, in the electronics and semiconductor industry or the food industry for the dehumidifying and air-drying process.
9. It is used in plastics processing to prevent the formation of condensate, material changes or granules from going lumpy.
10. It is used in ammunition depots or military equipment depots for climate conditioning.
11. It is used in dry air storage facilities or timber stores for climate conditioning.
Features of Industrial Desiccant Dehumidifier, model VAC-TTR-2800
1. It has a stainless steel housing which is durable and maintenance-friendly.
2. It has duoventic control respectively for air processing and air fans regeneration.
3. It has an over-temperature feature with a reboot lock (regeneration air).
4. This industrial desiccant dehumidifier has a rotor rotation control (rotor and drive).
5. VAC-TTR-2800 is easy to handle and has a long life service with low maintenance effort.
6. It has external on/off and hygrostat terminals.
7. It has a G4 air filter with electronic control and a collective warning light in the Z-line configuration.
8. This industrial desiccant dehumidifier has an adjustable air direction reversal. It needs only minimal conversion effort.
9. It has an electrical control box with an IP44 safety rating.
10. This industrial desiccant dehumidifier has potential-free contact for operation, fault, and filter.
Specifications of Industrial Desiccant Dehumidifier, model VAC-TTR-2800 for cold storage, steel industry, and dry air storage facilities:
1. This industrial desiccant dehumidifier for dry air storage facilities has a dehumidification capacity of 376.8 kg/24h or 15.7 kg/h.
2. The connection inlet for dry air (in case of intake air 20°C / 60 % RH) is Ø 315 mm.
3. The connection inlet for regeneration air is Ø 200 mm.
4. The connection outlet for dry air (in case of intake air 20°C / 60 % RH) is Ø 315 mm.
5. The connection outlet for regeneration air is Ø 200 mm.
6. It has 300 Pa external compression for dry air (in case of intake air 20°C / 60 % RH) and for regeneration air.
7. This industrial desiccant dehumidifier for cold storage has 3,150 m³/h air volume free-blowing.
8. For dry air (in case of intake air 20°C / 60 % RH), the nominal air volume is 2,800 m³/h.
9. For regeneration air, the nominal air volume is 570 m³/h.
10. The operating principle of this industrial desiccant dehumidifier for the steel industry is TTR Trisorp Dual.
11. It can be operated at -20 to 40°C at 0 to 100% RH (non-condensing).
12. The power supply of this industrial desiccant dehumidifier, model VAC-TTR-2800 is 380-480 V/50-60 Hz.
13. The nominal current consumption is 31.7 A.
14. It has 21.6 kW installed capacity.
15. The heating capacity of this industrial desiccant dehumidifier, model VAC-TTR-2800 is 18.9 kW.
16. It has a non-stop dehumidification.
17. The dimensions of this industrial desiccant dehumidifier, model VAC-TTR-2800 are L 1,348 x W 769 x H 1,323 mm without the packaging.
18. The recommended fusing is 32 A.
19. It has a terminal connection.
20. The regeneration heating design of this device is electric resistance.
21. For regeneration heating design, the gas and saturated vapor (4 bar) are optionally available.
22. Air pre-cooling and after-cooling are optionally available.
23. For mobility, transport frame, swivel casters with brake, trestle rollers, and crane lifting gear are optionally available.
24. The weight of this industrial desiccant dehumidifier is 250 kg without the packaging.
25. The housing type of this device is stainless steel.
26. It is for indoor installation and a shelter against the weather is available on request.
27. It has a wide-range voltage and rotor rotation control (rotor and drive).
28. It has an integrated heat recovery.
29. Electronic and mechanical hygrostat is available.
30. The moisture control, moisture and temperature registration and sensor-supported flowmatic control are optionally available.
31. This device comes with forklift pockets.
32. It has an operating hours counter.
We supply this Industrial Desiccant Dehumidifier, model VAC-TTR-2800 for cold storage, steel industry, and dry air storage facilities in the USA, UK, Germany, France, Netherlands, Spain, Switzerland, Sweden, and other European countries. Also, we supply this Industrial Desiccant Dehumidifier, model VAC-TTR 2800 for cold storage, steel industry, and dry air storage facilities in the Middle East and other Asian countries including India, Pakistan, Afghanistan, Bangladesh, Singapore, etc.