The TTK 122 E is equipped with a high-class gas automatic defrosting system which guarantees much more efficient dehumidification performance at low ambient temperature without time defrost pauses where there is no dehumidification efficiency compared to electronically defrosting systems. The dehumidification efficiency of hot gas automatic defrosting systems with the same compressor output (kW capacity) at a temperature range of 5-15°C is higher than 30%. The dehumidification outputs of the dehumidifiers come closer and closer at a temperature range of more than 15°C, until they are similar at approx. 18°C and on. Therefore, the TTK 122E is more suitable for use in unheated rooms at temperature below 15°C than other dehumidifiers with the same compressor output. This condensation dryer is ideal for dehumidifying and holding cellars or storage rooms dry and unheated.
The TTK 122E can be comfortably transported, thanks to steering wheels and bar handles on both sides of the device. Its durable stainless steel housing can withstand even the harshest conditions in the environment of use. Ideal conditions for example, application in constantly changing locations onbuilding sites or for fixing any water damage. The solid architecture design does not affect the operating comfort, quite the opposite – the operating panel fitted with simple to clean membrane keys allows direct input of the required air humidity through the digital-monitor in example. An energy saving benefit compared to analog operated dehumidifiers with fewer selection switches in value only.
Applications of Comfort Dehumidifier, model VAC-TTK-122E
1. It is suited for dry keeping of unheated basements or storage spaces.
2. It is used for dehumidification of unheated rooms.
3. It is used for dehumidifying different location on building sites.
4. It is used for clearing water damage operations.
5. It is used to dry water drippings on the floor, sweating walls and wet floor.
6. It is used to hasten the time of drying bathing suits, cotton tops or any clothes inside your home.
7. It can also be used to dry home activities such as arts and crafts, paintings, etc.
8. It helps to improve the quality of air which provides relief from such allergies.
9. It improves the storage of foods such as dry cereal, nuts and bread to keep from developing mold.
10. It is used to remove musty smell in your home making the room smell clean and fresh.
11. It is used to dry out the air and take away the moldy scent.
Features of Comfort Dehumidifier, model VAC-TTK-122E
1. It comes with a high quality hot gas automatic defrost to ensure a much more efficient dehumidification performance specially at low ambient temperatures.
2. It is made with a robust stainless steel housing that even the harshest conditions in the application environment can withstand.
3. It has an easy-care membrane keys control panel to enable the direct input of the desired humidity value shown in the digital display.
4. It has a warning light that indicates the filling of water in the water tank.
5. It has and overflow protection that automatically switch off once the water tank is full.
6. It comes with a reusable air filter which is easy to clean and belongs to the standard equipment.
7. It has an integrated hose connection for the direct discharge of the condensate into a drain.
8. It is a practical product in terms of energy-saving benefit as opposed to analogously controlled dehumidifiers with mere unitless selection by the use of rotary switch.
9. In operation, it has a display that shows the current air temperature and humidity values prevailing in the room.
10. It has a rubber-tyred swivel casters and bar handles on both sides to make the device much easier to handle and transport to different location without any difficulty.
Specifications of Comfort Dehumidifier, model VAC-TTK-122E for improving the quality of air, removing of musty smell and dehumidification of unheated rooms:
1. The recommended fusing for electrical values is 10 A.
2. The recommended room size for construction drying in m³ is 175
3. The recommended room size for construction drying in m² is 70
4. The recommended room size for dry keeping in m³ is 300
5. The recommended room size for dry keeping in m² is 120
6. Minimum temperature range for surrounding conditions is 9°C
7. Maximum temperature range for surrounding conditions is 35°C
8. The minimum humidity range for surrounding conditions is 40% RH
9. The maximum humidity range for surrounding conditions is 100% RH
10. For electrical values, the mains connection is 230 V / 50 Hz
11. It has a nominal current consumption of 3 A
12. It has a power input of 0.7 kW
13. The maximum amount of air is 350 m³/h.
14. At 30°C / 80% RH the dehumidification performance is 38 l/24h.
15. The maximum of the dehumidification performance 40 l/24h.
16. The connection plug type is CEE 7/7
17. It has a cable length of 2 m
18. The type of cooling agent for TTK 122E is R-134a
19. The amount of cooling agent in the compressor is 330
20. Its GWP factor is 1,430
21. The compressor’s CO 2 is equivalent to 0.472 t
22. The compressor’s Suction side pressure is 0.49 MPa.
23. The compressor’s discharge side pressure is 1.8 MPa.
24. The water tank capacity is 10 liter
25. The sound values for a distance of 1 m is 49 dB(A)
26. The dimensions of TTK 122E are L 310 x W 435 x H 650
27. The weight of the TTK 122E is 22.9 kg (packaging excluded)
We supply these Comfort Dehumidifier TTK 122 E for improving the quality of air, removing of musty smell and dehumidification of unheated rooms across all African countries covering south Africa, Kenya, Nigeria, Tanzania, Rwanda, Djibouti, Morocco, Ghana, Ethiopia, Uganda, Morocco, Tunisia, Cameroon, Mauritius, Gabon, Seychelles etc.