Industrial Desiccant Dehumidifier for dry keeping stores

The stationary desiccant dehumidifier is with a high dehumidification performance of 376 kg / 24 h. This is an ideal for the most diverse air and gas dehumidification tasks. And it has a high dry air flow rate with a low dew point. It has a standard stainless steel housing and an electrical control box with IP44 enclosure. This dehumidifier is developed and originally produced by Trotec in Germany according to the highest quality standards. 

This industrial desiccant dehumidifier works with the TTR Trisorp Dual principle. The desiccant dehumidifiers are the safe and economic dehumidifiers which can be used even at the low operating temperature ranges. It has two separate air flow ducts for process air and regeneration air with one fan for each duct. There are air filters behind every air inlet. This dehumidifier has a rotor desiccant wheel for the dehumidification with silica gel. The desiccant wheel turns continuously during the dehumidification with a low speed. For this dehumidifier, there is a heater battery for heating the regeneration air. There is a purging sector for heat recovery. The drive unit is with a gear motor, toothed belt pulley and toothed belt.

This desiccant dehumidifier is only to be used for dehumidifying the atmospheric air. The operating temperature of this dehumidifier is -20°C to +40°C and the maximum relative humidity is 95% RH non-condensing.  The power supply is 380 – 480 V/50 – 60 Hz. The weight of this industrial desiccant dehumidifier is 250 kg excluding packaging.

Applications of Industrial Desiccant Dehumidifier, model no. VAC-TTR-2800

    1. The Industrial Desiccant Dehumidifier model VAC-TTR-2800 is an ideal for the most diverse air and gas dehumidification tasks. 
    2. VAC-TTR-2800 can be used in hygiene-sensitive areas.
    3. It is used in cold stores for dry keeping of air and dew point control.
    4. It is used in cleanrooms and drying rooms.
    5. It is used in water processing facilities and pump stations for dry keeping of air.
    6. It can be used in dry air storage facilities or timber stores.
    7. It is used in ammunition depots or military equipment depots.
    8. It is used in the steel industry for process air drying and dehumidification of systems.
    9. It is used in plastic processing factories for preventing the formation of condensate and material changes. 
    10. It is used in the chemical and pharmaceutical industry for dehumidifying or drying process air.
    11. It is used in gas turbines for dehumidifying the process air.

Features of Industrial Desiccant Dehumidifier, model no. VAC-TTR-2800

    1. The Industrial Desiccant Dehumidifier model VAC-TTR-2800 has a stainless steel housing and an electrical control box with an IP44 enclosure.
    2.  VAC-TTR-2800 is a corrosion-proof dehumidifier and it can be operated even under harshest environmental conditions. 
    3. It has a high dry air flow rate with even a low dew point.
    4. VAC-TTR-2800 has the rotor rotation control (rotor and drive).
    5. There is an operating temperature management in regeneration air.
    6. The Industrial Desiccant Dehumidifier model VAC-TTR-2800 has external on/off terminals and hygrostat terminals.
    7. VAC-TTR-2800 has a robust and maintenance-friendly stainless steel housing.
    8. It has an over temperature protection system with restart lock for regeneration air.
    9. There is a purging sector for heat recovery.
    10. It has two separate air flow ducts for process air and regeneration air with one fan for each duct.
    11. There are air filters behind every air inlet.

Specifications of Industrial Desiccant Dehumidifier, model no. VAC-TTR-2800 for cold stores, pump stations and clean rooms

    1. The dehumidification capacity of the Industrial Desiccant Dehumidifier model VAC-TTR-2800 is 376.8 kg/24h or 15.7 kg/h (in case of intake air 20°C / 60 % RH).
    2. The external compression of dry air is 300 Pa.
    3. The nominal air volume is 2,800 m³/h.
    4. The air volume free-blowing is 3,150 m³/h.
    5. The diameter of dry air connection inlet of VAC-TTR-2800 is 315 mm. And the diameter of the dry air connection outlet is 315 mm.
    6. The operating principle of this industrial desiccant dehumidifier for cold stores is TTR Trisorp Dual.
    7. The normal air volume of regeneration air is 570 m³/h. And it has 300 Pa external compression.
    8. The diameter of regeneration connection inlet and regeneration connection outlet is 200 mm.
    9. Electrical Installed capacity is 21.6 kW.
    10. Mains connection of VAC-TTR-2800 is 380 – 480 V/50 – 60 Hz.
    11. The nominal current consumption is 31.7 A.
    12. Heating capacity is 18.9 kW.
    13. Operating range of this industrial desiccant dehumidifier for pump stations is -20°C to 40°C and 0 to 100% RH (non-condensing).
    14. The recommended electrical fusing for VAC-TTR-2800 is 32 A.
    15. VAC-TTR-2800 has an automatic non-stop dehumidification.
    16. The weight of this industrial desiccant dehumidifier for clean rooms is 250 kg (packaging excluded).
    17. The dimensions of the industrial desiccant dehumidifier model VAC-TTR-2800 is L 1,348 x W 769 x H 1,323 mm (packaging excluded).
    18. It has a stainless steel housing.
    19. The standard device version is designed for indoor installation and the shelter against the weather is optionally available.
    20. It has rotor rotation control (rotor and drive).
    21. This dehumidifier has a wide range of voltage.
    22. Over temperature protection system with restart lock (regeneration air) is available in this dehumidifier.
    23. Operating temperature management is available for regeneration air.
    24. It has a filter monitoring per air current and collective warning light.
    25. It has configurable air direction reversal (conversion requires minimal effort).
    26. It is with Duoventic control.
    27. There are terminals for external ON/OFF and terminals for hygrostat.
    28. It has an operating hours counter.
    29. It has an integrated heat recovery.
    30. This dehumidifier has potential-free contacts (operation, fault, filter).
    31. Air volume regulation is available with the standard dehumidifier. 
    32. The electronic hygrostat and mechanical hygrostat is available optionally.
    33. Moisture control is available as an option.
    34. Sensor-supported Flowmatic control is available optionally.
    35. The moisture and temperature registration is optionally available. 
    36. It has an electric resistance regeneration heating design.
    37. Transport frame, swivel casters with brake, trestle rollers and crane lifting gear is available as an option.
    38. It has forklift pockets for mobility.
    39. Air pre-cooling and after-cooling is optionally available.

We supply these Industrial Desiccant Dehumidifiers for dry keeping stores across all African countries covering South Africa, Kenya, Nigeria, Tanzania, Rwanda, Djibouti, Morocco, Ghana, Ethiopia, Uganda, Morocco, Tunisia, Cameroon, Mauritius, Gabon, Seychelles, etc.